|
Also branded as Signal Recovery EG&G and Ametek. See data sheet for details.
|
工厂翻新
要求信息
|
|
Frequency range 25 kHz to 200 MHz and up to 80 dB of drift-free dynamic reserve.
|
工厂翻新
要求信息
|
|
Signal Recovery 7265 DSP Lock-in Amplifier
7265 uses the latest digital signal processing (DSP) technology to extend the operating capabilities of the lock-in amplifier to …
|
工厂翻新
要求信息
|
|
SR850 100 kHz DSP lock-in amplifier
The SR850 is a digital lock-in amplifier based on an innovative DSP (Digital
Signal Processing) architecture. The SR850 boasts a …
|
工厂翻新
要求信息
|
|
Princeton Applied Research/EG&G/PAR 124A Lock-In Amplifier
The EG&G 124A is a 2Hz to 210kHz Lock-In Amplifier. The 124A Lock-In Amplifier contains both tuned and untuned input …
|
工厂翻新
要求信息
|
|
The SR810 Lock-In Amplifier and SR830 Lock-In Amplifier provide high performance at a reasonable cost. The SR830 simultaneously displays the magnitude and phase of a …
|
工厂翻新
要求信息
|
|
The SR810 Lock-In Amplifier and SR830 Lock-In Amplifier provide high performance at a reasonable cost. The SR830 simultaneously displays the magnitude and phase of a …
|
工厂翻新
要求信息
|
|
EG&G/PAR 5210 Dual Phase Lock-In Amplifier
The EG&G Model 5210 Lock-in Amplifier with a frequency range of .5 Hz to 120 kHz is the benchmark dual-phase …
|
工厂翻新
要求信息
|
|
The SR510 and SR530 are analog lock-in amplifiers which can measure AC signals as small as nanovolts in the presence of much larger noise levels. …
|
工厂翻新
要求信息
|
|
Lock in amplifier
|
工厂翻新
要求信息
|
|
EG&G The 5204 Lock-In Analyzer allows both the in-phase and quadrature components of an applied signal to be quickly and easily measured. Frequency range is …
|
工厂翻新
要求信息
|
|
The 5301 Two-Phase Lock-in Amplifier combines proven analog techniques of signal recovery with digital microprocessor control. Includes a 5316 Differential Preamplifier. It features two-phase operation, …
|
工厂翻新
要求信息
|
|
The SR510 and SR530 are analog lock-in amplifiers which can measure AC signals as small as nanovolts in the presence of much larger noise levels. …
|
工厂翻新
要求信息
|
|
EG&G Lock-In Amplifier 100KHz - 50MHz
Frequency range 100 KHz - 50 MHz for signal and referance channels. Sensitivity - 8 fullscale ranges from 100?V to …
|
工厂翻新
要求信息
|
|
Dual Channel Lock-In Amplifier
Features:
Frequency range: 5 Hz - 200 kHz
Fully programmable via IEEE 488 …
|
工厂翻新
要求信息
|
|
The 122 Lock-in Amplifier is continuously tunable from 5Hz to 50kHz in 4 ranges and has a calibration accuracy of ?5%.
|
工厂翻新
要求信息
|
|
|
The 126 Lock-In Amplifier is a high-performance amplifier or phase sensitive detector, incorporating synchronous detection to recover a coherent signal buried in high ambient noise …
|
工厂翻新
要求信息
|
|
|
The 127 Two Phase Lock-in Amplifier Accessory, when used with any current P.A.R. Lock-in Amplifier, provides synchronous detection, integration and simultaneous readout of the in-phase …
|
工厂翻新
要求信息
|
|
|
The 353 Phase-Lock Amplifier uses the principle of synchronous detection to obtain very narrow effective bandwidths and hence high noise rejection without tuned circuits. It …
|
工厂翻新
要求信息
|
|
The 5101 Lock-in Amplifier covers the frequency range 5Hz to 100kHz, has automatic reference tracking, built-in 2f mode and a 1 ?V full-scale sensitivity.
Metered
Recorder Output …
|
工厂翻新
要求信息
|
|
Two Phase Lock-in Amplifier
Features:
Sensitivity: 100nVT 1V full scale in 1-3.16-10 steps(15 ranges) max resolution 1nV max
Frequency range: 0.5 Hz to 200 kHz
Input …
|
工厂翻新
要求信息
|
