|
35/50 GHz 2/4 Port for TDR/TDT measurements.
|
工厂翻新
要求信息
|
|
The DSA8200 Series Sampling Oscilloscope, when configured with one or more optical sampling modules, provide complete optical test solutions for Telecom (125 Mb/s to 43.018 Gb/s) or …
|
工厂翻新
要求信息
|
|
Programmable Leveled Sine Wave Generator Plug-In
The SC 5030 Programmable Leveled Sine Wave Generator Is a GPIB programmable TM 5000-series plug-in instrument designed to provide …
|
工厂翻新
要求信息
|
|
The SD-24 is a dual-channel TDR/Sampling Head. This sampling head has a rise time of 17.5 ps or less, with a typical 20 GHz equivalent …
|
工厂翻新
要求信息
|
|
TRIGGER HEAD
|
工厂翻新
要求信息
|
|
The SD22 Sampling Head is a dual channel, 12.5GHz sampling head specifically designed for low-noise test and measurement in digital communications, digital design and debug, …
|
工厂翻新
要求信息
|
|
Sampling Head
The SD26 is a dual-channel, 20 GHz equivalent bandwidth sampling head. This sampling head has the same acquisition capability as the SD24 TDR/Sampling
Head but …
|
工厂翻新
要求信息
|
|
The S1 Sampling Head is a low-noise, 350 ps risetime unit with 50 ohms input impedance. Designed for use with the type 3S2, 3S5, and …
|
工厂翻新
要求信息
|
|
The S2 Sampling Head is a 75 ps risetime unit with a 50-ohm impedance. The S2 can be plugged in or attached by a cable …
|
工厂翻新
要求信息
|
|
The S3 Sampling Head is an active sampling-probe unit with 100 kohms, 2.3 pF input impedance. Up to 2 V of dc offset may be …
|
工厂翻新
要求信息
|
|
Tektronix S3A Sampling Head
Product Specs:
…
|
工厂翻新
要求信息
|
|
TEKTRONIX
S4 - Oscilloscope, 14 GHz BW, 1 Channel, Plug-In
The S4 Sampling Head has a 25 ps risetime, DC to
14GHz, 50 ohm input impedance. Variable DC …
|
工厂翻新
要求信息
|
|
TEKTRONIX S5 - Oscilloscope, 350 MHz BW, 1 Channel,
Plug-In
The S5 Sampling Head is a low-noise, 1 ns risetime
sampling unit with a 1 Mohm, 15 pF …
|
工厂翻新
要求信息
|
|
TRIGGER COUNTDOWN HEAD
|
工厂翻新
要求信息
|
|
The S53 Trigger-Recognizer Head is intended for use with the 7S12 TDR/Sampler (not included) to permit operation as a general-purpose sampling system. The S53 supplies …
|
工厂翻新
要求信息
|
|
The S54 Pulse Generator Head is a step generator designed for use with the 7S12 as a long line Time Domain Reflectometer unit. Intended for …
|
工厂翻新
要求信息
|
|
The S6 Sampling Head is a 50-ohm feed-through unit for high-speed applications. The unit features:
30 ps rise time
Displayed noise:
|
工厂翻新
要求信息
|
|
The SD32 Sampling Head is a single-channel, 50 GHz bandwidth sampling head. The SD32 performance is available for any new or existing CSA 803A/11801B mainframe …
|
工厂翻新
要求信息
|
|
Single-channel hgh frequency low-noise signal acquisition and jitter characterization module. Single set only, not as pictured showing multiple quantities.
|
工厂翻新
要求信息
|