|
The Agilent 86117A provides designers and manufacturers with a cost-effective solution for testing 40 Gb/s electrical signals. The 86117A has 50 and 30 GHz bandwidth … |
工厂翻新
US $21,995.00 |
|
Dual 20GHz Electrical Ch. Plug-In - The Agilent 86112A provides two accurate measurement channels with user selectable bandwidths of 12.4 or 20GHz. The lower bandwidth … |
工厂翻新
US $7,498.00 |
|
4194A ACCESSORIESAgilent HP 41941A Impedance Probe Kit
Description
The HP 41941A/B will perform reliable impedance evaluations up to 100 MHz. It can be used as a grounded … |
工厂翻新
US $3,995.00 |
|
Differential Probe, 200MHz |
工厂翻新
US $3,788.00 |
|
ProBER 2Mb/s handheld test set |
工厂翻新
US $2,992.00 |
|
Active Probe |
工厂翻新
US $2,862.00 |
|
The 85024A High-Frequency Probe makes it easy to perform in-circuit measurements. An input capacitance of only 0.7 pF shunted by 1 megohm of resistance permits … |
工厂翻新
US $2,100.00 |
|
The hand-held 545A Logic Probe is light, rugged, overload protected, and very fast; 80 MHz in TTL, 40 MHz in CMOS. Operates from 3 to … |
工厂翻新
US $1,495.00 |
|
Close-Field Probe Set |
工厂翻新
US $1,492.00 |
|
The 1152A Active Probe provides a 0.6 pF, 100kohm input that enables ultra low loading of the device-under-test, making it an ideal companion for the … |
工厂翻新
US $1,295.00 |
|
The 54701A Active Probe is a 2.5GHz, 10:1 probe that provides ultra-low loading on a device-under-test because of its low 0.6 pF capacitive loading and … |
工厂翻新
US $1,295.00 |
|
HP 1610A Logic Analyzer
Product Specs:
Repetition rate:up to 10 MHzInput RC of 100 kohms shunted
by approximately 5 pF (at probe … |
工厂翻新
US $761.00 |
|
Active Probe 750MHz |
工厂翻新
US $708.00 |
|
10:1, 10 Mohm, 1.5m, Passive Probe
|
工厂翻新
US $678.00 |
|
Active Probe 54542/40/22/20A |
工厂翻新
US $498.00 |
|
300 kHz to 10 MHz E-Field Probe |
工厂翻新
要求信息 |
|
|
|
工厂翻新
要求信息 |
|
|
|
工厂翻新
要求信息 |
|
|
The 11064A Accessory Probe Kit is an accessory of the 3406A RF Voltmeter. It consists of the following:
11063A: 50 ohm "T"
11061A: 10:1 Divider Tip
10218A: BNC … |
工厂翻新
要求信息 |
|
|
The 1123A Active Probe is used for probing high source impedances at high frequencies. The probe should be used to apply input signals to the … |
工厂翻新
要求信息 |
|
The 1120A Active Probe is a 500MHz probe for probing high source impedances at high frequencies. This 1:1 active probe provides a probe tip impedance … |
工厂翻新
要求信息 |
|
|
hpib Digital Clock |
工厂翻新
要求信息 |
|
probe 10:1 1Meg 8pF for 9-14pF inputs |
工厂翻新
要求信息 |
|
Probes |
工厂翻新
要求信息 |
|
|
TEMPERATURE PROBE |
工厂翻新
要求信息 |
|
The HP Agilent 10041A 100 MHz mini probe offers modular construction, superior electrical performance, and high reliability. Modular construction allows individual replacement of probe tips, … |
工厂翻新
要求信息 |
|
|
TESTMOBILE EQUIPMENT CART |
工厂翻新
要求信息 |
|
|
PROBE INTERFACE |
工厂翻新
要求信息 |
|
|
AC Probe
|
工厂翻新
要求信息 |
|
|
The 11655A Impedance Probe Kit makes possible swept accurate complex impedance measurements over the wide impedance range 0.1 ohm to >10 kohm. The design allows … |
工厂翻新
要求信息 |
USA & Canada: (800) 615-8378
Mexico 52-55-8421-4127
Chile: 2-897-4335
Brazil: 301-32793
United Kingdom:20-8144-7837
Ireland: 1-442-8376
Sweden: 46-46-288-61-42
Denmark: 369-92915
Finland: 358-9-2316-3837
China: 86-136-3217-2095
Hong Kong: 852-2690-1360
Singapore: 65-6320-8596
Australia: 61-2-8011-3687