|
The Agilent W281D transforms W-band (75 GHz to 110 GHz) waveguide transmission line into 50-ohm coaxial line.
W281D Coaxial Waveguide Adapter, 1.0 mm (m), 75 to …
|
工厂翻新
要求信息
|
|
The 85650A Quasi-Peak Adapter can be attached to the spectrum analyzer to provide manual and automatic quasi-peak detection capability with the resolution bandwidth recommended by …
|
工厂翻新
要求信息
|
|
SCSI-to-RS232 mux box
|
工厂翻新
要求信息
|
|
Note - Probe not included. The N5449A adapter allows connection for probes that require a high impedance scope input such as a high impedance passive …
|
工厂翻新
要求信息
|
|
ARMATURE MUX W/ST
|
工厂翻新
要求信息
|
|
PCS Adapter
|
工厂翻新
要求信息
|
|
Thermistor Mount. High efficiency and good radio frequency (RF) match are characteristic of the 478A Coaxial Thermistor Mount. Used in conjunction with the 432 Power …
|
工厂翻新
要求信息
|
|
2.4 mm female to 2.4 mm female adapter
|
工厂翻新
要求信息
|
|
The Agilent 11900A is a metrology-grade 2.4 mm male to 2.4 mm male adapter with dc to 50 GHz operation.
|
工厂翻新
要求信息
|
|
The Agilent 11900B is a metrology-grade 2.4 mm female to 2.4 mm female adapter with dc to 50 GHz operation.
|
工厂翻新
要求信息
|
|
The Agilent 11900C is a metrology grade 2.4 mm male to 2.4 mm female adapter with dc to 50 GHz operation.
|
工厂翻新
要求信息
|
|
The Agilent 11850C is a 50 ohm three-way power splitter that is recommended for use with the Agilent 8753 network analyzer. Its connectors are type-N …
|
工厂翻新
要求信息
|
|
E5346A 34-ch single-ended Mictor connector probe, connects to 40-pin LA cable
|
工厂翻新
要求信息
|
|
TDMA Cellular Adapter
|
工厂翻新
要求信息
|
|
COAX MIXER
|
工厂翻新
要求信息
|
|
HP-IB Cable, 1 Meter
|
工厂翻新
要求信息
|
|
HP-IB Cable, 2 Meter
|
工厂翻新
要求信息
|
|
HP-IB Cable, 4 Meter
|
工厂翻新
要求信息
|
|
HP-IB Cable, .5 Meter
|
工厂翻新
要求信息
|
|
The 11858A Transistor Fixture Adapter adapts the 11600B and 11602B transistor fixtures (vertical test port configuration) to the 85046A S-Parameter test set. The unit uses …
|
工厂翻新
要求信息
|
|
The 11869A Adapter provides the electrical and mechanical interface between the 8350 and 86200 series plug-ins. All of the 8350's standard operating features, including HP-IB …
|
工厂翻新
要求信息
|
|
The 432A power meter is an automatic, self-balancing power meter for use with temperature compensated thermistor sensors. High efficiency and good radio frequency (RF) match …
|
工厂翻新
要求信息
|
|
HP 432B / Agilent 432B Thermistor Power Meter
The 432B Digital Power Meter uses four power ranges with full-scale readings of 10 and 100 …
|
工厂翻新
要求信息
|
|
The 432C Power Meter is a digital readout power meter which uses 478, 486, 8478 series thermistor mounts. Automatic zeroing from front panel switch. Three …
|
工厂翻新
要求信息
|
|
The 432C Power Meter is a digital readout power meter which uses 478, 486, 8478 series thermistor mounts. Automatic zeroing from front panel switch. Three …
|
工厂翻新
要求信息
|
|
|
TERMINAL BLOCK
|
工厂翻新
要求信息
|
|
The Agilent 59306A Relay Actuator simplifies the control of external HP-IB devices. Front panel push buttons make it easy to establish and debug signal routing …
|
工厂翻新
要求信息
|
|
Adapter Set, 3.5mm-3.5mm
|
工厂翻新
要求信息
|
|
Coax to WR112
|
工厂翻新
要求信息
|
|
|
50 Ohm-75 Ohm Adapter
|
工厂翻新
要求信息
|
