|
3 GHz Dual Channel Amplified Optical Module
86111A and 86111U are short wavelength optical
modules that have up to 15 GHz of bandwidth optimized
for testing signals from …
|
工厂翻新
要求信息
|
|
Single Channel 50GHz Plug In
|
工厂翻新
要求信息
|
|
30 GHz Optical / 40 GHz Electrical Module
Key Features & Specifications:
30 GHz optical channel for 9/125 fibers
Wavelength range: 1000-1600 nm
Reference receiver capability …
|
工厂翻新
要求信息
|
|
Plug-in: For 1310 and 1550 nm applications, this plug-in has a 2.5 GHz optical channel with 155 and 622 Mb/s switchable filters for SDH / …
|
工厂翻新
要求信息
|
|
Optical Electrical Channel 20Ghz Plug-In Module
Each channel has two selectable bandwidth settings. In the lower bandwidth mode: of 12.4 GHz, oscilloscope noise performance …
|
工厂翻新
要求信息
|
|
Designed to be used in the 8650 series mainframe, the 83590A Broadband RF Sweep Oscillator Plug-In covers the frequency range from 2.0 to 20GHz. Maximum …
|
工厂翻新
要求信息
|
|
30 GHz optical / 40 GHz electrical module
Each channel has two selectable bandwidth settings. In the lower bandwidth mode: of 12.4 GHz, oscilloscope …
|
工厂翻新
要求信息
|
|
The 54007A Accessory Kit provides an assortment of precision terminations, adapters, and other devices with 3.5mm connectors for low-loss measurements. These devices have been specifically …
|
工厂翻新
要求信息
|
|
DC Source/Monitor Plug-In
|
工厂翻新
要求信息
|
|
The 86250D Single-Band Plug-In makes extensive use of microelectronics for superior performance and high reliability at an extremely low price. The unit is completely compatible …
|
工厂翻新
要求信息
|
|
The 86242A Single-Band Plug-In make extensive use of microelectronics for superior performance and high reliability at an extremely low price. The unit is completely compatible …
|
工厂翻新
要求信息
|
|
The 86230B Single-Band Plug-In make extensive use of microelectronics for superior performance and high reliability at an extremely low price. The unit is completely compatible …
|
工厂翻新
要求信息
|
|
86632B Modulation Plug-In Module
For use with the 8660x series mainframes. Features include internal or external modulation, accurate to +/- 5% of full scale, and meters.
|
工厂翻新
要求信息
|
|
Sweep Oscillator Plug-in. 17 to 22 GHz, 10 mW MAX Leveled Power., +/-70 MHz in sweep mode.
|
工厂翻新
要求信息
|
|
The 86290A Broadband Plug-In is designed for 8620-Series Sweep Oscillators.
Provides CW or continuous swept, 2.0 to 18GHz frequency coverage
Power output is calibrated from 0 to …
|
工厂翻新
要求信息
|
|
Agilent 54118A
500 MHz to 18 GHz Trigger
|
工厂翻新
要求信息
|
|
TDR Sampler Plug-In
|
工厂翻新
要求信息
|
|
The 8413A Phase/Gain Indicator plug-in meter display unit, for 8410 Network Analyzer Mainframes, displays relative amplitude in dB or relative phase in degrees between reference …
|
工厂翻新
要求信息
|
|
The 86241A Single-Band Plug-In make extensive use of microelectronics for superior performance and high reliability at an extremely low price. The unit is completely compatible …
|
工厂翻新
要求信息
|
|
|
工厂翻新
要求信息
|
|
sampler plugin
|
工厂翻新
要求信息
|
|
TDR/Sampling Plug In
|
工厂翻新
要求信息
|
|
AUTOMATIC FREQUENCY CONVERTER PLUG-IN
|
工厂翻新
要求信息
|
|
The 86632A Modulation Section Plug-In provides AM and FM modulation when used with RF section in 8660-series Generators. Internal 400Hz and 1kHz modulation provided. A …
|
工厂翻新
要求信息
|
|
The 17506A Recorder Plug-in Module is for use with the 7100 Series Strip Chart Recorders. It is available with one of 19 voltage spans. It …
|
工厂翻新
要求信息
|
|
The 17505A Recorder Plug-In is a very high sensitivity, multi-span plug-in for 7100-series recorders. Accuracy of ? 0.25% per step.
Voltage Spans: 0.1, 0.2, 0.5, 1, …
|
工厂翻新
要求信息
|
|
The 17502A Recorder Plug-in is for use in 7100-, 7101- series recorders.
Voltage Spans: Single span to match cold-junction thermocouples of types J, K, R, S, …
|
工厂翻新
要求信息
|
|
The 17502A Recorder Plug-in is for use in 7100-, 7101- series recorders.
Voltage Spans: Single span to match cold-junction thermocouples of types J, K, R, S, …
|
工厂翻新
要求信息
|
|
The 17502A Recorder Plug-in is for use in 7100-, 7101- series recorders.
Voltage Spans: Single span to match cold-junction thermocouples of types J, K, R, S, …
|
工厂翻新
要求信息
|
|
ECL signals are normally offset from ground, while high frequency test equipment generally provides 50-ohm termination to ground. Attempting to connect an ECL signal directly …
|
工厂翻新
要求信息
|