|
Wireless Connectivity Test Set MT8862A is for measuring the RF TRx characteristics of WLAN IEEE802.11a/b/g/n/ac including the 2.4 GHz and 5 GHz bands.
Please see the …
|
工厂翻新
要求信息
|
|
The MT8860C is an integrated one-box test set dedicated to testing 802.11 WLAN devices. It provides a high-speed measurement solution that is suitable for both …
|
工厂翻新
要求信息
|
|
Anritsu MT8222A Base Station Test Set Master is the value choice for deploying, maintaining and troubleshooting 2G/2.5G, 3G, and 4G wireless base stations. The BTS …
|
工厂翻新
要求信息
|
|
Bluetooth Test Set with no EDR and no Audio
Anritsu understands the requirements of the manufacturers of Bluetooth modules.
The MT8852B is a highly …
|
工厂翻新
US $26,882.00
US $11,994.00
|
|
|
The Anritsu MT8852B can establish a link with the module under test and perform a comprehensive set of transceiver measurements in under 10 seconds. If …
|
工厂翻新
要求信息
|
|
The Anritsu MT8860B is the only WLAN Test Set with Network and Direct modes for testing WLAN devices conforming to IEEE 802.11 standards.
The MT8860B is …
|
工厂翻新
要求信息
|
|
The MT8860A is an integrated one-box test set dedicated to testing WLAN devices in the 2.4 GHz Industrial Scientific and Medical (ISM) frequency bands. MT8860A …
|
工厂翻新
要求信息
|
|
The Anritsu MT8852A Bluetooth Test Set With Audio offers all of the radio layer measurement capability of the MT8850A Bluetooth Test Set and adds support …
|
工厂翻新
要求信息
|
|
OPTICAL TEST SETThe MT9810B provides high-accuracy and high-reliability evaluation of a wide range of optical devices and optical systems. It offers DFB-LD light sources conforming …
|
工厂翻新
要求信息
|
|
|
Anritsu MT8222A Base Station Test Set
BTS Master MT8222A is the value choice for deploying, maintaining and troubleshooting 2G/2.5G, 3G, and 4G wireless base stations. This …
|
工厂翻新
要求信息
|
|
Flexibility for Every Application The MT9810A offers superior accuracy and reliability for evaluating a wide range of optical devices and systems. It has a full …
|
工厂翻新
要求信息
|
|
Calibration kit to calibrate your VNA or VNMS for 12-term error-corrected measurements. Please see the data sheet for full capabiliies.
|
工厂翻新
要求信息
|
|
Microwave Communications Test Set
|
工厂翻新
要求信息
|
|
|
Microwave Test Set
|
工厂翻新
要求信息
|
|
MP1301C is, M20 type, DM01 type, M0B-3.2K alone test other types of conversion equipment in each multiplex, the following set of digital one / two …
|
工厂翻新
要求信息
|
|
MICROWAVE REPEATER TEST SET Anritsu ME 717C Microwave Repeater Test Set is designed for the measurement of microwave repeaters in the 2, 4, 5, 6, …
|
工厂翻新
要求信息
|
|
Anritsu MS9020D OPTICAL LOSS TEST SET
The MS9020D is a handy optical measuring instrument which incorporates an LD or an LED light source and an optical …
|
工厂翻新
要求信息
|
|
Anritsu MT9090A Network Master Fault Locator. The Anritsu MT9090A providesall of the features and performance required for installation and maintenance of short fibers in a …
|
工厂翻新
要求信息
|
|
Anritsu understands the requirements of the manufacturers of Bluetooth modules. Test times must be minimized yet performance must be assured.
The MT8852B is a highly targeted …
|
工厂翻新
要求信息
|
|
Wiltron Active Device Test Set 40MHz-40GHz
|
工厂翻新
要求信息
|
|
4-port Test Set, K (for use with MS4642A or MS4644A VNA Models. VNA must have, at minimum, either option 51, 61 or 62)
The MN469xB …
|
工厂翻新
要求信息
|
|
The ME7832L is the industry's leading LTE UE
protocol conformance test system solution and is based on3GPP TS36.523 for GCF/PTCRB
Terminal Certification. It uses the stable and …
|
工厂翻新
要求信息
|
|
K Connector Verification Kit.
|
工厂翻新
要求信息
|
