|
1.31/1.55um, SM LD Light Source |
工厂翻新
要求信息 |
|
Sheid Box for Mobile Phone Testing
Features:
Frequency: 800 to 2500 MHz
Shield characteristic: |
工厂翻新
要求信息 |
|
Optical Sensor. 750 to 1800nm, -60 to +3dBm |
工厂翻新
要求信息 |
|
ISDN Basic Interface Tester (192 kbit / s, ISDN)
The MP5201B, ISDN (Integrated Services Digital Network) basic reference point for the user network interface … |
工厂翻新
要求信息 |
|
50-75 Ohms Adapter |
工厂翻新
要求信息 |
|
Low Pass Filter |
工厂翻新
要求信息 |
|
Low Pass Filter |
工厂翻新
要求信息 |
|
Optical Sensor for use with ML9002A |
工厂翻新
要求信息 |
|
The MN9662A/9664A/9672A/9674A are channel selectors for switching optical signals from the common channel(s) to a selected output channel. GPIB and RS-232C interfaces are provided … |
工厂翻新
要求信息 |
|
Optical 156Mb/s & 622Mb/s (1310 nm, OC-3/OC-12) Module for the MP1570A, MP 1550A, MP1552B, & MP1555B mainframes. |
工厂翻新
要求信息 |
|
Jitter/Wander module from 1.544Mb/s to 622Mb/s for both the European and North-American standard. Fits the MP1570A, the MP1552B and MP1555B Sonet/SDH analysis platforms. (Requires … |
工厂翻新
要求信息 |
|
The MN924C and MN9605C are high-precision optical attenuators designed for use with single mode optical fibers. A combined step attenuator and continuous attenuator permit … |
工厂翻新
要求信息 |
|
2.5G 1310/1550 Tx/Rx Module for use in MP1552B or MP1555B. |
工厂翻新
要求信息 |
|
Optical Spectrum Analyzer Display Unit. |
工厂翻新
要求信息 |
|
100KHz-2000MHz RF Communication Analyzer Frequency Range: 100kHz - 2GHz; Measurements: 100k-2GHz, power meters, signal generators, AF transmitter, AF level meter, … |
工厂翻新
要求信息 |
|
Anritsu MT9090A Network Master Fault Locator. The Anritsu MT9090A providesall of the features and performance required for installation and maintenance of short fibers in a … |
工厂翻新
要求信息 |
|
The AnritsuMT9081F is a compact and affordable handheld battery-operated OTDR designed for last-mile FTTx metro access network testing as well as most short and long-haul … |
工厂翻新
要求信息 |
|
RF Network Analyzer The S113D is used to measure impedance, VSWR, loss, gain, isolation and group delay of any two ports of a multi … |
工厂翻新
要求信息 |
|
The ACCESS Master MT9081 Series are compact and affordable handheld battery-operated OTDRs designed for last-mile FTTx metro access network testing as well as most short- … |
工厂翻新
要求信息 |
|
The CMA5 Series Power Meters are economical, accurate and easy to use handheld units for attenuation and power throughput measurements on point-to-point fiber optic links.
They … |
工厂翻新
要求信息 |
|
Fast and easy-to-use, Anritsu’s CMA50 line of Light Sources provides stable output for point-to-point attenuation measurements or modulated tones for easy fiber identification. They are … |
工厂翻新
要求信息 |
|
Combining the technology of the industry-leading CMA4000i Optical Test System with the CMA5000 Multi-Layer Test Platform makes the CMA4500 the Next Generation in OTDR Testing.
Based … |
工厂翻新
要求信息 |
|
NetClaw is an advanced network and service performance analyzer that allows fixed and mobile operators and vendors to quickly provision, troubleshoot, and optimize existing and … |
工厂翻新
要求信息 |
|
Power Sensor (10 MHz to 18 GHz, -30 to +20 dBm, N connector) |
工厂翻新
要求信息 |
|
The Anritsu MA2422A power sensor is designed for use with the Anritsu ML2430A Series Power Meters (See: Anritsu ML2438A Power Meter). The MA2422A includes … |
工厂翻新
要求信息 |
|
The MA2400A/B Series Power Sensors consist of MA247XA Series
Power Sensors, MA246XA/B Series Power Sensors, MA248XA
Series Universal Power Sensors, MA242XA/B Series Thermal Power
Sensors, and MA244XA … |
工厂翻新
要求信息 |
|
Error Detector 50-3000 MHzInput data from -3V to 1.75V, select term at GND or -2V; Clock phase adjust from -2ns to 2ns, select for … |
工厂翻新
要求信息 |
|
Anritsu MP1656A 2488.32 Mb/s Digital Data AnalyzerThe MP1656A was designed for use with the MP1570A SONET/SDH/PDH/ATM Analyzer to allow analysis of section, H-path (AU), … |
工厂翻新
要求信息 |
|
ROD ANTENNA The MP414B/415B can be used with the ML428B Interference Field Strength Meter. |
工厂翻新
要求信息 |
|
Fiber Adapter to connect fiber cables with outer dimensions from 0.25 mm to 1 mm. |
工厂翻新
要求信息 |