|
ROD ANTENNA The MP414B/415B can be used with the ML428B Interference Field Strength Meter.
|
工厂翻新
要求信息
|
|
Fiber Adapter to connect fiber cables with outer dimensions from 0.25 mm to 1 mm.
|
工厂翻新
要求信息
|
|
MS0901A Optical LED Source Plug-In for MS9020D
|
工厂翻新
要求信息
|
|
1310/1550nm LED Source for MS9020D
|
工厂翻新
要求信息
|
|
MS0908A LD Source 635nm Visible Light Source for MS9020D
|
工厂翻新
要求信息
|
|
Anritsu MS2702A Spectrum Analyzer, 100Hz to 24.5GHz The Anritsu MS2702A spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of …
|
工厂翻新
要求信息
|
|
Anritsu MW9076C OTDR module: Wavelength: 1.31/1.55/1.625 Microm, Dynamic Range: 41.3/39.5/37 dB (typical), Dead Zone: 1.6/8 m. REQUIRES DISPLAY UNIT (MU250000A OR MU250000A4)
|
工厂翻新
要求信息
|
|
Ultra Low Noise Synth CW Generator (0.01GHz -26.5 GHz)The Series 690XXA Synthesized CW Generator and the Series 691XXA Synthesized Sweep Generator are microprocessor-based, synthesized …
|
工厂翻新
要求信息
|
|
The MA2400A/B Series Power Sensors consist of MA247XA Series
Power Sensors, MA246XA/B Series Power Sensors, MA248XA
Series Universal Power Sensors, MA242XA/B Series Thermal Power
Sensors, and MA244XA Series …
|
工厂翻新
要求信息
|
|
The Anritsu MA2422A power sensor is designed for use with the Anritsu ML2430A Series Power Meters (See: Anritsu ML2438A Power Meter). The MA2422A includes a …
|
工厂翻新
要求信息
|
|
Programmable Attenuator
The MN63A/65A/72A/64B provide GPIB as a standard feature and
are suitable for automatic measuring system components used in
R&D, inspection, or production. The 50 …
|
工厂翻新
要求信息
|
|
2.5G 1310/1550 Tx/Rx Module for use in MP1552B or MP1555B.
|
工厂翻新
要求信息
|
|
Optical Spectrum Analyzer Display Unit.
|
工厂翻新
要求信息
|
|
100KHz-2000MHz RF Communication Analyzer Frequency Range: 100kHz - 2GHz; Measurements: 100k-2GHz, power meters, signal generators, AF transmitter, AF level meter, tests …
|
工厂翻新
要求信息
|
|
Anritsu MT9090A Network Master Fault Locator. The Anritsu MT9090A providesall of the features and performance required for installation and maintenance of short fibers in a …
|
工厂翻新
要求信息
|
|
The AnritsuMT9081F is a compact and affordable handheld battery-operated OTDR designed for last-mile FTTx metro access network testing as well as most short and long-haul …
|
工厂翻新
要求信息
|
|
Impedance, Analyzer The S113D is used to measure impedance, VSWR, loss, gain, isolation and group delay of any two ports of a multi port …
|
工厂翻新
要求信息
|
|
The ACCESS Master MT9081 Series are compact and affordable handheld battery-operated OTDRs designed for last-mile FTTx metro access network testing as well as most short- …
|
工厂翻新
要求信息
|
|
The CMA5 Series Power Meters are economical, accurate and easy to use handheld units for attenuation and power throughput measurements on point-to-point fiber optic links.
They …
|
工厂翻新
要求信息
|
|
Fast and easy-to-use, Anritsu’s CMA50 line of Light Sources provides stable output for point-to-point attenuation measurements or modulated tones for easy fiber identification. They are …
|
工厂翻新
要求信息
|
|
NetClaw is an advanced network and service performance analyzer that allows fixed and mobile operators and vendors to quickly provision, troubleshoot, and optimize existing and …
|
工厂翻新
要求信息
|
|
Carrying Case
|
工厂翻新
要求信息
|
|
(MS2711D not included) The FCN4760 is a block down converter for the 4.7 to 6.0 GHz frequency range. It is designed to work with the …
|
工厂翻新
要求信息
|
|
Fast Diode Sensor, 10 MHz to 18 GHz
|
工厂翻新
要求信息
|
|
Optical Channel Selector
|
工厂翻新
要求信息
|
|
Optical Time Domain Reflectometer
|
工厂翻新
要求信息
|
|
Filter/Mixer, Ms4600/8; Ms4623B HARMONIC PHASE STANDARD
|
工厂翻新
要求信息
|
|
MA2411A Pulse Power Sensors are used with the ML2480A Series Power Meters.
|
工厂翻新
要求信息
|
|
Anritsu MG724G 13 GHz Signal Generator
The Anritsu MG724G signal generator is an electronic instrument that generates repeating electronic signals. It contains an electronic oscillator, …
|
工厂翻新
要求信息
|
|
MP1201A ERROR RATE TESTER
|
工厂翻新
要求信息
|