|
The 626PA6003-1 Monitor Plug-In analyzes three channels of 50 to 600 V, 45/65Hz. The unit will monitor and record impulses, sags and surges, undervoltages, overvoltages …
|
工厂翻新
要求信息
|
|
The 626PA6003 Monitor Plug-In monitors 3 phase AC from 50-600 V, 45-64 Hz.
|
工厂翻新
要求信息
|
|
The 626PA6003-1 Monitor Plug-In analyzes three channels of 50 to 600 V, 45/65Hz. The unit will monitor and record impulses, sags and surges, undervoltages, overvoltages …
|
工厂翻新
要求信息
|
|
The 626PA6002A2R3 Low Range DC Monitor Plug-in is a plug-in module to the 626 mainframe will monitor and record impulses, sags and surges, under and …
|
工厂翻新
要求信息
|
|
|
|
工厂翻新
要求信息
|
|
626-PA-6001 Line Analyzer Plug-In
Designed to analyze AC power line disturbances at pre-installation sites
Detailed, accurate and comprehensive analysis is required before installation and operation of …
|
工厂翻新
要求信息
|
|
|
The 626PA6002A DC Monitor Plug-In is used to monitor UPS battery voltages or power supplies.
Inputs of 0.5 to 80.0 V DC
High limit of 0.6 to …
|
工厂翻新
要求信息
|
|
The 626PA6006-1 Neutral-Ground Monitor Plug-In is recommended for whenever a neutral is present in the distribution system. It is used to detect common mode impulses …
|
工厂翻新
要求信息
|
|
|
Single Phase Plug-In
|
工厂翻新
要求信息
|
|
|
Single Phase Plug-In
|
工厂翻新
要求信息
|
|
|
Single Phase Plug-In
|
工厂翻新
要求信息
|
|
|
The 626PA6001 Line Analyzer Plug-In is designed to analyze AC power line disturbances at pre-installation sites. Detailed, accurate and comprehensive analysis is required before installation …
|
工厂翻新
要求信息
|
|
|
Single Phase Plug-In
|
工厂翻新
要求信息
|
|
|
Single Phase Plug-In
|
工厂翻新
要求信息
|
|
The 305PA3005 High Frequency Plug-In is designed for high accuracy to 11MHz. Using a self-tracking oscillator, the input signals are converted to 40kHz for precision …
|
工厂翻新
要求信息
|
|
The 305PA3007 Programmable and Autoranging Plug-in is designed for use with the 305 Phasemeter Mainframe and features high accuracy over a broad range of input …
|
工厂翻新
要求信息
|
|
The 305PA3010 Special-Purpose Plug-In has a high input impedance and is equipped with closely matched low-pass filters to pass 125Hz signals while rejecting 400Hz signals, …
|
工厂翻新
要求信息
|
|
The 626PA6002A DC Monitor Plug-In is used to monitor UPS battery voltages or power supplies.
Inputs of 0.5 to 80.0 V DC
High limit of 0.6 to …
|
工厂翻新
要求信息
|
|
The 626PA6006 Neutral-Ground Monitor Plug-In is recommended for whenever a neutral is present in the distribution system. It is used to detect common mode impulses …
|
工厂翻新
要求信息
|
|
The 626PA6006-2R3 Neutral-Ground Monitor Plug-In is recommended for whenever a neutral is present in the distribution system. It is used to detect common mode impulses …
|
工厂翻新
要求信息
|
