Network Analyzers : Agilent-Keysight E5100A-002-010-200

Agilent/HP E5100A Network Analyzer, 10 kHz to 300 MHz

The Agilent E5100A high-speed network analyzer is an excellent solution for electronic component manufacturers, especially resonator and filter manufacturers, who require extra-high throughput. The E5100A improves production line productivity with its fast measurement speed (fastest sweep speed is 0.04ms/point), fast waveform analysis commands, and high-speed processor. The E5100'As low-noise performance and fine selection IFBW provide high quality measurements with lower fluctuations.

Options:
001 = One RF OUT Port
002 = Two RF OUT Ports, Built-in Power Splitter
003 = Two RF OUT Ports, Switched Single Output
005 = Parallel I/O Mode A
006 = Parallel I/O mode B
007 = Opto-Isolated Parallel I/O
022 = Evaporation Monitoring Function
023 = Phase Tracking Function for 300 MHz version
100 = 300 MHz, 1 Receiver, Port A
118 = 180 MHz, 1 Receiver, Port A
1CM = Rackmount kit
1CN = Handle kit
1CP = Rackmount and handle kit
1D5 = High stability frequency reference
200 = 300 MHz, 2 Receivers, Ports R and A
218 = 180 MHz, 2 Receivers, Ports R and A
300 = 300 MHz, 3 Receivers, Ports R, A and B
318 = 180 MHz, 3 Receivers, Ports R, A and B
400 = 300MHz, 4 Receivers, Ports R, A, B and C
600 = 300MHz X'tal resonator test to use w/PI-network
618 = 180 MHz X'tal Resonator Test to use w/PI-Network
701 = BNC Input Connector (50 Ohm) on Port A
702 = BNC Input Connector (50 Ohm) on Port A and B
703 = BNC 50/1 Mohm Selectable Input on Port A
704 = BNC 50/1 Mohm Selectable Input on Port A and B
705 = Type N 50-Ohm Input Connector on Port A
706 = Type N 50-Ohm Input Connector on Port A and B
707 = Type N 50/1 Mohm Selectable Input on Port A
708 = BNC 50/1 Mohm Selectable Input on Port A and B
800 = Standard Frequency Reference
801 = Power extended 1 RF OUT port
801 = Power Extended One RF OUT Port
802 = Power Extended Two RF OUT Ports, Built-in Power Splitter
803 = Power Extended Two RF OUT Ports, Switched Single Output
804 = Parallel I/O Standard
823 = Phase Tracking Function for 180 MHz version

• 制造商: Agilent
• 模型: E5100A-002-010-200

联系我们的更多信息