Spectrum Analyzer 9kHz to 3GHz with Tracking Generator and TFT color display
The FS300 is a highly accurate spectrum analyzer with a frequency range of 9
kHz to 3 GHz. Featuring modern, digital frequency processing techniques, it
offers high measurement quality at an attractive price. The new FS315 is
additionally equipped with a built-in 3 GHz tracking generator for scalar
network analysis; the tracking generator is also suitable for generating
fixed-frequency signals. Plus, the FS315 includes various detectors for
evaluating measurement results and allows electric field strength measurements
taking into account the antenna factors.
High-quality measurement characteristics
Since the displayed average noise level is typically -115 dBm (300 Hz), even
weak signals can be reliably detected. Points in the measurement trace are
displayed with an accuracy unrivalled in this price class.
Resolution Bandwidth from 200 Hz to 1 MHz/20 MHz
With 16 different digitally implemented resolution bandwidths from 200 Hz to 1
MHz, the R&S FS300 can be optimally adapted to different measurement tasks.
The FS315 extends the range up to 20 MHz. Large bandwidths for overall
measurements ensure short sweep times while small bandwidths provide high
frequency resolution and low noise level.
Scalar Network Analysis
The FS315 with built-in tracking generator is the perfect solution for
costefficient testing of the transmission behavior of filters, cables,
amplifiers and other components. With the optional VSWR bridge, reflection
measurements can also be performed. Entering any frequency offset between 0 Hz
and 3 GHz allows measurements on frequency-converting DUTs. For simple
applications, the tracking generator can be used as a signal generator with a
fixed frequency.
Locating EMC Weak Spots
The HZ-15 Near-Field Probe Set are diagnostic tools used for locating EMC
weak spots on printed boards, integrated circuits, cables, shieldings and other
trouble spots. The HZ-15 is adequate for emission measurements from 30 MHz to 3
GHz. The HZ-16 Preamplifier, provides approximately 20 dB gain and a noise
figure of 4.5 dB, increases sensitivity for measurements. In combination with
the FS300/FS315, the HZ-16 Preamplifier and HZ-15 Near-Field Probe Set are a
cost-effective means of analyzing and locating sources of interference during
development.
Frequency counter with 1 Hz resolution
With the aid of the built-in frequency counter, the signal frequency can be
measured with 1 Hz resolution in the entire frequency range. An additional
frequency counter is therefore not required which saves space on the lab bench.
Maximum input level +33 dBm
The maximum input level of the FS300/315 permits signals to be measured far
beyond the common limits. Mobile phones with a maximum output power of 2W can be
directly connected to the spectrum analyzer without external attenuators being
required.
Ergonomic user interface
Operation is menu-guided so that even untrained users will quickly obtain
correct measurement results. Clear structures simplify navigation within the
menus. Users familiar with spectrum analyzers from Rohde & Schwarz will
quickly find the menu items they know from other Rohde & Schwarz
instruments. The bright TFT color display with 320x240 pixel resolution allows
traces to be read even at an angle or with high background lighting.
Remote control via USB
Another new feature of the FS300/315 is the USB remote-control interface. You
can select external PC control even during instrument operation by means of
"hot plug and play" simply by establishing a USB connection. This is
the first time that lab test equipment can be remote-controlled via USB without
any restrictions. With the aid of the USB cable, the R&S FS300/315 can be
operated even at positions which are difficult to access, such as. in a shielded
chamber. A Windows 2000/XP compatible driver for different development
environments is provided with the R&S FS300/315. A PC software package is
also available for remote control of the R&S FS300/315 and for result
display and recording.
Compact Package
The FS300/315 is notable for its compact and robust design. Whether on the bench
or in the rack, it takes up a minimum of space. Two series instruments can even
be accommodated next to each other in a 19-inch rack. The new, adjustable handle
fulfills several functions. It serves for carrying the FS300/315. It can be
moved and locked in almost any desired position. With the aid of the handle, the
instrument can be set up in a tilted position so that an optimum viewing angle
can be obtained for the display. If the handle is in the way, it can easily be
put away so that several FS300/315 can be stacked, for instance.
Internal memory for settings and traces
Up to five traces and ten settings can be stored in the internal memory of the
R&S FS300. Frequently used settings can be easily called up and the same
parameter need not be set over and over again. This also prevents setting
errors. Stored traces can be printed for easy documentation.
9 kHz to 3 GHz
Resolution bandwidth 200 Hz to 1 MHz (to 20 MHz with FS315)
Tracking generator for scalar transmission and reflection measurements (FS315)
Frequency counter with 1 Hz resolution
Maximum input level +33 dBm
Ergonomic user interface
Remote control via USB interface
Electronic attenuator with 2 dB steps
Measurement functions: signal tracking, TOI measurement, marker and delta markers, noise markers, signal bandwidth
Channel Power, OBW, Return Loss, Transmission measurements (FS315)>
RMS detector (FS315)
AM/FM Demod (FS315)
Stores up to 10 set-ups and 5 traces
Small size - 8.6 x 5.8 x 13.8 inches, 15.4 lbs
| Model | SKU | Description |
|---|
| HZ-15 | 1147.2736.02 | Probe
set for E and H nearfield emissions 30 MHz to 3 GHz |
| HZ-16 | 1147.2720.02 | Preamplifier
100 kHz to 3 GHz, 20 dB power supply 100 - 230 V for probe HZ-15 |
| ZRB2 | 0373.9017.52 | SWR
bridge 5 - 3000 MHz, 50 Ohm, 0.5 W, N connectors directivity 46/40 dB |
| ZRB2 | 0373.9017.53 | SWR
bridge 5 - 2500 MHz 50 Ohm, 0.5 W, N-connectors directivity 40 dB |
| ZZA-300 | 1147.1281.00 | 19"
rack adapter, 2 x 1/2, 3 HU for AM300/FS300/SM300/UP300/UP350 |
| ZZK-300 | 1147.2542.02 | Carrying
case for AM300/FS300/SM300/UP300/UP350 |
| FS315-C3 | 1147.1000.03.C3 | THREE
YEARS OF US DEPOT CALIBRATIONS BASED ON R&S RECOMMENDED CALIBRATION
INTERVAL - INCLUDES TEST DATA. THE FIRST CALIBRATION IS INCLUDED WITH
PRODUCT DELIVERY WITH 2 ADDITIONAL DEPOT CALIBTATIONS |
| FS315-C5 | 1147.1000.03.C5 | FIVE
YEARS OF US DEPOT CALIBRATIONS BASED ON R&S RECOMMENDED CALIBRATION
INTERVAL - INCLUDES TEST DATA. THE FIRST CALIBRATION IS INCLUDED WITH
PRODUCT DELIVERY WITH 4 ADDITIONAL DEPOT CALIBTATIONS |
| FS315-R3 | 1147.1000.03.R3 | THREE
YEARS OF DEPOT REPAIR COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF
NECESSARY TO COMPLETE A REPAIR - 1ST YEAR OF REPAIR COVERAGE IS PROVIDED
BY THE 12-MONTH NEW PRODUCT WARRANTY. |
| FS315-R5 | 1147.1000.03.R5 | FIVE
YEARS OF DEPOT REPAIR COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF
NECESSARY TO COMPLETE A REPAIR - 1ST YEAR OF REPAIR COVERAGE IS PROVIDED
BY THE 12-MONTH NEW PRODUCT WARRANTY. |
- 制造商: Rohde Schwarz
- 模型: FS315
