Spectrum Analyzers : Rohde Schwarz FSL6.16-B10

此产品是工厂翻新

Rohde Schwarz FSL6.16-B10
放大图片Rohde Schwarz FSL6.16-B10

Call 1-800-615-8378 for more information

Request a Quote

Check Rental Availability

租金测试设备


Rohde & Schwarz, Inc. FSL616 Spectrum analyzer 9 kHz - 6 GHz -135 - +20 dBm, RBW 300 Hz - 10 MHz With Tracking Generator 1 MHz - 6 GHz (P/N 1300.2502.16)

The Rohde & Schwarz, Inc. FSL616 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz, Inc. FSL616. The CRT displays received signal strength (y-axis) against frequency ( x-axis).



Some applications for Rohde & Schwarz, Inc. FSL616 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz, Inc. FSL616 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz, Inc. FSL616 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.






 
ModelSKUDescription
DCV-10240.2187.10Documentation
of calibration values
FSL6-DKD1161.2675.02FSL6
DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with
device)
FSL-B101300.6208.02GPIB
interface
FSL-B221300.5953.02RF
preamplifier gain 20 dB
FSL-B301300.6308.02DC
power supply 12 - 28 V
FSL-B311300.6408.02NiMH
battery pack
FSL-B41300.6008.02OCXO
reference frequency
FSL-B51300.6108.02Additional
interfaces video/IF-output, power meter 28 V - DC for noise source
FSL-B61300.5901.02TV
trigger for FSL and for ZVL with ZVL-
FSL-B71300.5601.02Narrow
resolution filters 10 Hz - 300 Hz
FSL-B81300.5701.02Gated
sweep function for FSL and for ZVL with ZVL-K1
FSL-K141302.0913.02Spectrogram
measurement, application firmware for FSL and for ZVL with ZVL-K1
FSL-K201301.9675.02Application
firmware for cable TV and TV measurements for R&S FSL
FSL-K301301.9817.02Application
firmware for noise figure and gain measurements for FSL and for ZVL with
ZVL-K1
FSL-K71301.9246.02Analogue
demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1
FSL-K721302.0620.023GPP
Code Domain Power measurements for base station for FSL and for ZVL with
ZVL-K1
FSL-K81301.9398.02Application
firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) for
FSL and for ZVL with ZVL-K1
FSL-K91301.9530.02Power
sensor measurements with NRP
FSL-K911302.0094.02Application
firmware for WLAN 802.11A,B,G measurements for FSL and for ZVL with
ZVL-K1
FSL-K91N1308.7903.02Upgrade
of FSL-K91 to 802.11n
FSL-K921302.0236.02Application
firmware for WiMAX 802.16, OFDM measurements
FSL-K92U1302.0307.02Upgrade
from FSL-K92 to FSL-K93
FSL-K931302.0736.02Application
Firmware for WIMAX 802.16 OFDM/OFDMA Measurements for FSL and for ZVL
with ZVL-K1
FSL-Z31300.5401.00Soft
carrying bag
FSL-Z41300.5430.02Additional
charger unit for FSL-B31. Allows charging the battery without FSL
EVS-Z65201.7760.00Accessory:
Protective hard cover (for EVS300, FSL, ZVL)
ZZA-S3341109.4487.00Adapter
for BW2000 3HU 3/4 cabinet with impact protection
FSL6-C31300.2502.16.C3Three
years of depot calibration coverage based on the R&S recommended
calibration interval - includes test data. The first calibration is
included with product delivery with 2 additional depot calibrations
FSL6-C51300.2502.16.C5Five
years of depot calibration coverage based on the R&S recommended
calibration interval - includes test data. The first calibration is
included with product delivery with 4 additional depot calibrations.
FSL6-R31300.2502.16.R3Three
years of depot repair coverage, including recalibration and test data if
necessary to complete a repair - 1st year of repair coverage is
provided by the 12-month new product warranty
FSL6-R51300.2502.16.R5Five
years of depot repair coverage, including recalibration and test data if
necessary to complete a repair - 1st year of repair coverage is
provided by the 12-month new product warranty
FSL-B81300.5710.02Gated
Sweep 2)
FSL-K9011302.0507.02First
prolongation of option FSL-K0 enabling of all firmware options by
further 1000 operating hours


  • 制造商: Rohde Schwarz
  • 模型: FSL6.16-B10