R&S ZVR is a Vector Network Analyzer, bidirectional with four receiver
channels.
ZVR-61 (P/N 1127.8551.61) = 9 kHz to 4 GHz, 4-Channel, Bidirectional, 50 Ohm, Passive
ZVR-62 (P/N 1127.8551.62) = 300 kHz to 4 GHz 4-Channel, Bidirectional, 50 Ohm, Active
ZVR and ZVC comprise a test set with two SWR bridges (ZVR) or directional couplers (ZVC), an RF switch, two measurement channels and - unlike ZVRE and ZVCE - two reference channels. With this configuration a variety of novel calibration procedures, eg TNA, can be performed, which considerably improve the accuracy particularly in non-coaxial applications. ZVR and ZVC are the allrounders of the family and suitable for applications in R&D and production no matter how sophisticated.
The ZVR Family Network Analyzers can be provided with different test set options so that an optimally configured test setup can be made available to suit the applications.
Features:
Excellent dynamic range: >130 dB (measurement bandwidth 10 Hz)
Low inherent noise: <-130 dBm (measurement bandwidth 10 Hz)
Broad frequency range for universal use :10 Hz to 4 GHz (ZVRE, ZVR); 20 kHz to 8 GHz (ZVCE, ZVC)
High measurement speed: <125 s/point (normalized); <240 s/point (fully calibrated)
Fast data transfer via IEC/IEEE bus: Transfer time <15 ms (200 points)
Customized models for special applications: Modular configuration using
options
High sweep rate: >25 sweeps/s (200 points)
Manual calibration techniques: TOM, TRM, TRL, TNA, TOSM, TOM-X
Automatic calibration: AutoKal option
Compatibility with PC, CAE: Internal PC with WindowsNT operating system suitable for PC applications
Options:
ZVR-B1 = AutoKal
ZVR-B2 = Time Domain
ZVR-B4 = Mixer Measurements (Includes harmonics measurements)
ZVR-B5 = Nonlinear Measurements
ZVR-B6 = Reference Channel Ports
ZVR-B7 = Power Calibration
ZVR-B8 = 3-Port Adapter
ZVR-B10 = Increased Output Power for Port 1
ZVR-B14 = 4-Port Adapter
ZVR-B25 = External Measurements, 50 Ohm
ZVR-K9 = Virtual Embedding Networks
ZVR-Z1 = Service Kit
- 制造商: Rohde Schwarz
- 模型: ZVR
