Power Analyzers : Quadtech Hybrid 2000
此产品是工厂翻新
放大图片QuadTech Hybrid 2000 AC/DC/IR/DCR Analyzer
|
|
贸易在您的测试设备
|
QuadTech Hybrid 2000
- Perform hipot & contact resistance testing with one instrument
- Automatic switching for multi-point testing
- Monitor resistance while checking intermittent connections
- Insulation resistance testing up to 5000V DC
Features
- AC Dielectric Withstand Voltage 50 to 5000VAC, Current to 30mA
- DC Dielectric Withstand Voltage 50 to 6000VDC, Current to 10mA
- IR Measurements from 1MΩ to 50GΩ, Test Voltage 50 to 5000VDC
- DC Resistance Measurements from 50mΩ to 100kΩ
- Real and Total Current Measurement
- Built-in Scanner with 8 HV Output Channels for Multi-Point Testing
- Programmable Hi/Lo Limits for Pass/Fail Testing
- Ability to Perform Multiple Tests in Sequence
- Internal Storage and Recall of 50 Test Setups, 20 Steps Each
- Programmable Ramp, Dwell, Test and Fall Times
- Open/Short Circuit Check to Ensure the Device is Connected
- Pause Mode Allows the Operator to Change Device Connection & Continue
- Front Panel Lockout Prevents Changes to the Test Setup
- Automatic Offset to Zero Out Residual Current
- Ground Fault Interrupt (GFI) for auto shutdown if current imbalance >0.5mA
- Fast Cutoff and Quick Discharge of Device Under Test
- RS232 Interface Included Standard
- Front Panel Output Connection
- Built-In Operator Prompted Software Calibration Routine
- 制造商: Quadtech
- 模型: Hybrid 2000
|
|
