Agilent/HP N4691B Electronic Calibration Module, 300 kHz to 26.5 GHz, 3.5 mm, 2-port
The Agilent N4691B MW electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy and accurate. The RF ECal system is now easily controlled by one of two methods depending on the network analyzer. The Agilent PNA and ENA series of network analyzers controls the module directly via the USB interface. The modules can also be controlled via an 85097B interface kit when used with an Agilent 8753E/ES/ET or 8720D/ES/ET. (This requires a special parallel cable and firmware Rev. 7.74).
ECal is an ideal solution for calibrating network analyzers. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
Options:
00A - Add 3.5 mm adapters
00F - Both 3.5 mm connectors are female on module
00M - Both 3.5 mm connectors are male on module
150 - Wooden storage box
1A7 - ISO 17025 compliant calibration
A6J - ANSI Z540 compliant calibration
M0F - One Male Connector and one Female on module(Type N)
UK6 - Commercial calibration certificate with test data
