Tek 577-D2 Curve Tracer ( 177 Standard Test Fixture included)
Tekronix 577 Curve Tracer has a collector supply variable from 0 to 1600 volts in several operating modes, including AC. The current available varies from 10A(20 A Pulsed) on the lowest voltage range to 40mA (80mA Pulsed) on the highest voltage range. The collector supply power is set using a switch that changes series resistance to maintain the same peak power setting as the voltage range is changed. The collector supply is automatically disabled when the vertical display exceeds 2.5 screen dimensions, helping to protect the device under test from destructive currents.
The D1 Display Unit features spilt-screen storage, 6 1/2 inch CRT, variable stored brightness, and a beam finder.
The D2 Display Unit features a 6 1/2 inch CRT and a beam finder.
577-177 Test Fixture:
Features:
* Vertical deflection factors from .2 nA/DIV (with magnifier on) to 2 A/DIV.
* Correct deflection factor is indicated by a back-lighted knob skirt.
* The vertical system monitors collector current even on the most sensitive ranges, such that three-terminal measurements can be made on all ranges.* A mode switch that provides for grounded base or grounded emmitter-base breakdown or leakage.
* A bias supply that is adjustable from -12 volts to +12 volts. Output impedance
< 10K ohms.
* Interlocking switch for the collector supply with which the higher voltage ranges are disabled until the protective cover is in place over the device under test or a momentary-contact interlock defeat button is pressed.
* "Device under test" connectors that accept a wide range of adapters, including those with Kelvin connections for high current measurements.
- 制造商: Tektronix
- 模型: 577-D2-177
