Fiber Signal Identifiers Fiber Optic Equipment : Exfo LFD-300

此产品是工厂翻新

Exfo LFD-300
放大图片Exfo LFD-300

Call 1-800-615-8378 for more information

Request a Quote

Check Rental Availability

省钱-购买二手设备


Key Features and Benefits * Pinpoints a specific live fiber using EXFO s FiberFinder functionality * Induces minimal loss: ?1 dB * Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz, 2 kHz) * Improved: faster test cyclethree times faster Pinpointing Live and Dark Fibers: Guesswork Ends Here Performing network upgrade or optical testing requires a fiber to be disconnected. This is often easier said than done, since finding the right connection can be tricky, namely because of fiber mislabeling or poor record keeping. While the dark fiber can be identified using a tone generator (270 Hz, 1 kHz, 2 kHz), the live fiber identification technique often involves one technician pulling one end of the patchcord, with another technician trying to identify which patchcord is moving at the other enda process that translates into long delays and can result in unnecessary service disruption. Combined with the TG-300B Tone Generator, the innovative LFD-300B FiberFinder Live Fiber Identifier enables technicians to identify a specific live fiber without having to disconnect it and, above all, without having to guess. This brings key benefits: * No more network outages as a result of fiber detection/identification procedures * The minimized need to access the network helps prevent errors EXFO s LFD-300B FiberFinder: A Uniquely Designed Live Fiber Identifier For major singlemode fibers, insertion loss is a function of the bending angle (see Figure 1). Although the angles differ, the behavior remains the same. The LFD-300B FiberFinder brings a unique approach: the power loss is monitored as the angle is changed. Therefore, the angle is automatically optimized for each fiber type and each singlemode wavelength. This results in clear-cut advantages: * Maximum loss of 1 dB guaranteed for most singlemode telecom fibers (most jacket types) and any wavelength * No damage to the fiber: bending is always minimal, and the fiber is released when no power is detected * Traffic detection and direction identification * In-line, non-disruptive power estimation * Safe to be used in long-haul applications and on high-payload fiberscontrary to traditional live fiber detectors * Optimized for 900 ?m, 1.6 mm and 3 mm jackets; no need to replace the headpiece Ambient Light Offset EXFO s LFD-300B performs an ambient light offset prior to fiber bending, which makes it less sensitive to ambient light. A push-down cap can also be placed on the head-end to block intense ambient light. Industry First: the FiberFinder Functionality For detecting dark/live fibers or identifying a particular dark fiber using a pulse light (270 Hz, 1 kHz, 2 kHz), traditional LFD functionalities do the trick. However, they cannot pinpoint a specific live fiberespecially with doubtful labeling and poor record-keepingand help you ensure you disconnect the right one. In addition, disconnecting the wrong fiber causes downtime, a costly consequence that can easily be avoided. For instance, at US$10,000 per hour and per wavelength, downtime can cost up to US$160,000 per hour for a 16-channel 10 Gbit/s WDM system. Combined with the TG-300B, a non-intrusive, non-disruptive clip-on signature generator that is based on FiberFinder technology, EXFO s LFD-300B addresses this need with guaranteed low loss. Installed at the transmitter site, the TG-300B adds a typical 0.25 dB signature to the live signal by applying a soft low-frequency modulation pressure to the fiber. This signature is then detected at the other end by the LFD-300B, in mere seconds. Browse by language: Specification Sheets Name Size (KB) Date Language LFD-300B-TG-300B FiberFinder Live Fiber Identifier-Tone Generator 852 8/18/2009 English Application Notes Name Size (KB) Date Non-Intrusive Testing on High Bend Radius Fiber 2400 4/11/2007 Note: Product manuals and software downloads can be found in the My EXFO section (log-in required; free registration) Accessories * Flexible arm and clamp for single-person operation * Replacement light cap * More information available in the Accessories section Replacement Parts * AC adapter/charger * Carrying case Useful Support Links * Reach technical support * Find nearest sales contact * How to buy * Service, maintenance and calibration information * Learning and training My EXFO Online Product Support The following product tools and services can be found in My EXFO and are available online to all guests. If you are already a My EXFO user, you can login here. If you are not already registered, please register now. * User manuals * Software and upgrades * Product registration * Warranty information Learning and Training Instructor-led and online trainings and tutorials are offered for many of our products. Find out more in the Learning and Training section. Light SourceFLS-300 * Can transmit with a wavelength-identification digital encrypted protocol so that any compatible unit can automatically use the proper calibration parameters * Autonomy of 120 hours * Instrument identification available in six languages * Highest output power in the industry * Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership
  • 制造商: Exfo
  • 模型: LFD-300