The DM5110 is part of the last digital multi-meter series
that Tektronix manufactured for the 5000 series power modules. It is similar to
the DM511 but adds GPIB/IEEE488 programmability with 4 additional controlled
functions:
Comparison
Low
limit set
High
limit set
Triggered
operation
This versatile and accurate
4 .5 digit DMM provides eight measurement functions:
DC voltage
TRMS AC voltage (to 50
KHz) from millivolts to 1000 volts peak,
DC and TRMS AC
amperes from 1 uA to 2 amps,
Ohms from milliohms to
20 meg-ohm
dBV or dBm
Null and hold
function.
All functions are fully auto-ranging so only a push of a button selects the
function and the microprocessor takes care of the rest automatically selecting
the optimum range VERY quickly. Excellent over-ranging is provided for best
resolution as well. A selector switch is provided on the front panel for
switching the input from the front to the rear connector. This allows you to
patch within the power module connector bus or over the IEEE488/GPIB bus to
configure a test setup without all the patch cables on the front.
