Cisco WS-X6716-10G-3CXL 6500 16-Port 10 Gigabit Ethernet Module with DFC3CXL, requires X2
The 16-port 10 Gigabit Ethernet module is supported in the Cisco Catalyst 6500 Series chassis. When operating in an E-Series chassis (6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E), the 6509-NEB-A chassis with dual fan tray, the configuration is NEBS 3 compliant (supports operating temperatures up to 55 degrees C). When operating in a non-E-Series chassis (6506, 6509, 6513) or 6509-NEB-A with single fan tray, fan tray 2 and 2500W or higher power supplies are required, and the configuration is not NEBS 3 compliant (supports operating temperatures up to 40 degrees C only). The module can be deployed in all slots of a 3/4/6/9-slot chassis. When operating in a 13-slot chassis, it must be deployed in slots 9-13. It is not supported in the 6503 non-E Series chassis or Cisco 7600 Series Routers.
The 16-port 10 Gigabit Ethernet module is interoperable with all models of the Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10 Gigabit Ethernet uplinks or Cisco Catalyst 6500 Series Supervisor Engine 720, including VS-S720-10G-3C, VS-S720-10G-3CXL, WS-Sup720, WS-Sup720-3B, and WS-Sup720-3BXL. When mixing DFCs in the same chassis, the chassis will operate in the mode of the lowest common denominator.
The following optics will be supported on the 16-port 10 Gigabit Ethernet module at first customer ship (FCS): X2-10GB-LRM, X2-10GB-SR, X2-10GB-LR, X2-10GB-ER, X2-10GB-LX4, and X2-10GB-CX4. To meet EMI compliance, SR and CX4 requires version -02 or above; ER requires version -03 or above; LR and LX4 requires version -04 or above. There is no restriction on LRM. The above versions of these optics will be shipping when WS-X6716-10G-3C and WS-X6716-10G-3CXL FCS. The LRM optics provide 220m over multimode fiber and are ideal for deployment in campus LAN uplinks and in data centers.
- 制造商: Cisco
- 模型: WS-X6716-10G-3CXL
