USA Price Only - For International Pricing Contact Us to Request a Quote
1550 nm Optical Module ( 1 mW, pulse, CW) for 6040
Used in Conjunction with BNC Model 6040 Optical Pulse Generator Mainframe
The Model 155H is similar to the Model 106H except for the following:
The pulse wavelength is now 1550nm
Light Out
Spectral Peak
1064nm +/- 15nm, nominal
Spectral Width
less than 5nm, typical
Power Levels
5mW to 50mW Standard (up to 200mW custom), adjustable peak level; baseline fixed at zero.
Resolution
0.2mW.
Transition Times (10% to 90%)
1ns rise time, 5ns fall time.
Dynamic Range
10 dB.
Absolute Accuracy
+/- 1 dB (10% to full scale).
Temperature Coefficient
0.1 dB/ degrees C.
Fiber
62/125 Multi-Mode Fiber Standard (Contact Factory for custom)
Connector
FC Standard (Contact Factory for ST or SMA)
Timing
Trigger
Internal 0.01 Hz to 2 kHz; external 0 to 2 kHz.
Pulse Widths
10, 15, 20 and 25 ns. (Contact factory for custom widths between 5 nsand 50 ns.)
Delay
0 ns to 640 s (plus fixed delay) in Single Pulse. Minimum pulse separation500 uS.
Module Delay
30 ns typical (fixed) mainframe's Pulse Out to module's Pulse Out and 35 ns to Light Out. Jitter 100 ps rms.
Pulse Out
Amplitude
2 V into 50 ohms.
Transition Times
1.5 ns rise time, 2 ns fall time.
Common Module Specifications
Store
A ROM determines the instrument's allowable operating conditions andunits of display applicable for the installed module.
A nonvolatile memory (RAM) in each module stores up to ten complete settings of operating conditions (trigger level, slope, etc.) and output pulse parameters.
Recall
The RAM-stored settings can be manually or bus transferred to the mainframeto produce the pre determined outputs.
Weight
2 Ibs net (0.9 kg); 5 Ibs shipping (2.3 kg) (when installed in a Model 6040 Mainframe, est. 24 lbs. shipping)
Ambient
Same as Model 6040 mainframe
- 制造商: Berkeley Nucleonics Corporation
- 模型: 155 OPTICAL MODULE
