RESISTANCE HiTESTER RM3542 featuring ultra-high speed and precision,
characteristics that make it ideal for use with automatic testing systems. Used
in combination with such systems, the instrument can perform automatic,
high-speed shipping inspections for mass-produced resistors and other components
to the industry s highest standards.
FEATURES
Industry-leading ultra-high-speed and ultra-high-precision
resistance measurement
The RM3542 employs the DC four-terminal method to measure resistors,
chip inductors, EMC components, and other parts at high speed and
precision. The instrument can test 1% tolerance (F-type) resistors in as
little as 0.9 ms (according to HIOKI findings).
Under standard settings, accuracy of +/-0.011% is guaranteed for 1 kΩ
measurement in fast mode (at a measurement speed of 0.9 ms).
High-resolution, 7-digit display
Thanks to its high-resolution, 7-digit display and broad measurement
range of 0 Ω (0.0000 mΩ) to 120.0000 MΩ, the RESISTANCE
HiTESTER RM3542 can also test 0.1% tolerance (B-type) resistors.
Contact check to ensure measurement reliability
A continuous contact check function monitors whether the resistor or
other component under measurement is being properly measured at all
times. A voltage monitor function can detect failed measurements, and
the instrument can repeat measurements in a reliable manner. This
functionality combines to increase measurement reliability.
Contact check to ensure measurement reliability
A continuous contact check function monitors whether the resistor or
other component under measurement is being properly measured at all
times. A voltage monitor function can detect failed measurements, and
the instrument can repeat measurements in a reliable manner. This
functionality combines to increase measurement reliability.
Low-power resistance measurement
The RM3542 supports low-power resistance measurement with limited
measurement currents in the 1,000 mΩ to 1,000 Ω range,
enabling testing of parts such as chip inductors and EMC components that
must be measured using low currents.
Saving and outputting measured values
The RM3542 can store up to 30,000 measurement data points in its
memory. The ability to transfer measurement data for an entire reel of
chip resistors to a computer or other device after testing of the reel
is complete makes a significant contribution to quality control.