Mixed Domain Oscilloscope
MDO4054-3 :
Mixed Domain Oscilloscope with (4) 500 MHz analog channels, (16) digital channels, and (1) 3 GHz RF input
MDO4054-6 :
Mixed Domain Oscilloscope with (4) 500 MHz analog channels, (16) digital channels, and (1) 6 GHz RF input
Introducing the worlds first and only oscilloscope with a built-in spectrum analyzer. For the first time ever, you can capture time-correlated analog, digital, and RF signals for a complete system view of your device. See both the time and frequency domain in a single glance. View the RF spectrum at any point in time to see how it changes over time or with device state. Solve the most complicated design issues, quickly and efficiently, with an oscilloscope as integrated as your design.
Based on the industry-standard MSO4000B Oscilloscope Series, you can now use your tool of choice, the oscilloscope, to look at the frequency domain rather than having to find and re-learn a spectrum analyzer. However, the power of the MDO goes well beyond simply observing the frequency domain as you would on a spectrum analyzer. The real power is in its ability to correlate events in the frequency domain with the time domain phenomena that caused them.
When both the RF channel and any analog or digital channels are on, the oscilloscope display is split into two views. The upper half of the display is a traditional oscilloscope view of the Time Domain. The lower half of the display is a Frequency Domain view of the RF input. Note that the Frequency Domain view is not simply an FFT of the analog or digital channels in the instrument, but is the spectrum acquired from the RF input.
Key Performance Specifications:
4 Analog Channels
500 MHz or 1 GHz Bandwidth Models
16 Digital Channels
MagniVu High-speed Acquisition provides 60.6 ps Fine Timing Resolution
1 RF Channel
50 kHz - 3 GHz or 50 kHz - 6 GHz Frequency Range Models
Ultra-wide Capture Bandwidth =1 GHz
Standard Passive Voltage Probes 3.9 pF Capacitive Loading and 500 MHz or 1 GHz Analog Bandwidth
Mixed Domain Analysis:
Time-correlated Analog, Digital, and RF Signal Acquisitions in a Single Instrument
Wave Inspector Controls provide Easy Navigation of Time-correlated Data from both the Time and Frequency Domains
Amplitude, Frequency, and Phase vs. Time Waveforms derived from RF Input
Selectable Spectrum Time to Discover and Analyze how RF Spectrum Changes over Time Even on a Stopped Acquisition
Spectral Analysis:
Dedicated Front-panel Controls for Commonly Performed Tasks
Automated Peak Markers Identify Frequency and Amplitude of Spectrum Peaks
Manual Markers enable Non-peak Measurements
Trace Types Include: Normal, Average, Max Hold, and Min Hold
Detection Types Include: +Peak, Peak, Average, and Sample
Spectrogram Display enables Easy Observation and Insight into Slowly Changing RF Phenomena
Automated Measurements Include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
Trigger on RF Power Level
Triggered or Free Run Spectral Analysis
Ease of Use Features:
10.4 in. (264 mm) Bright XGA Color Display
Small Footprint and Lightweight Only 5.8 in. (147 mm) Deep and 11 lb. (5 kg)
Connectivity:
Two USB 2.0 Host Ports on the Front Panel and Two on the Rear Panel for Quick and Easy Data Storage, Printing, and Connecting a USB Keyboard
USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or Direct Printing to a PictBridge -compatible Printer
Integrated 10/100/1000BASE-T Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
Optional Serial Triggering and Analysis:
Serial Protocol Trigger, Decode, and Search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM
Optional Application Support:
Advanced RF Triggering
Power Analysis
Limit and Mask Testing
HDTV and Custom Video Analysis
- 制造商: Tektronix
- 模型: MDO4054