Hipot Testers : Quadtech Guardian 6100 Plus

此产品是工厂翻新

Quadtech Guardian 6100 Plus
放大图片Quadtech Guardian 6100 Plus

Call 1-800-615-8378 for more information

Request a Quote

Check Rental Availability

我们出售的高品质的测试设备


The Guardian 6100 Plus Electrical Safety Analyzer performs AC and DC hipot (hy-pot), insulation resistance, ground bond and leakage current measurements for a complete electrical safety testing solution. The built-in leakage current scanner provides up to 20A input current capability for functional run testing, and, in addition, the connections for earth, enclosure, patient and line leakage current testing to meet IEC 60601-1 compliance requirements.

  • Perform functional and safety testing in a single unit
  • Simultaneous Hipot and Ground Bond Testing
  • Integration into an automated production environment
  • High voltage/high current scanner options for multi-point testing
  • Archive test setups, data and results with CaptivATE Automation Software
Features
  • Programmable AC Hipot Voltage 50 to 5000VAC, Output Current to 40mA
  • Programmable DC Hipot Voltage 50 to 6000VDC, Output Current to 12mA
  • IR Measurements from 100kohm to 50Gohm, Test Voltage 50 to 1000VDC
  • Programmable Ground Bond Current from 1 to 40A*, R Measurement to 510mohms
  • Twin Port - Simultaneous Hipot and Ground Bond
  • Built-in 20A Hipot/Line Leakage Scanner
  • Functional Run Testing: Voltage (to 300V), Current (to 20A) or Power (to 4400VA)
  • Earth, Enclosure, Patient & Patient Auxiliary Leakage Current Measurements
  • Open/Short Circuit Detection to ensure DUT is connected
  • Pause Mode Allows the Operator to Change Device Connection and Continue
  • Programmable Hi/Lo Limits for Pass/Fail Testing
  • Programmable Ramp, Dwell and Test Times
  • Perform Multiple Tests in Sequence with Store/Recall of 100 Setups, 50 Steps Each
  • Front Panel Lockout Prevents Changes to the Test Setup
  • Automatic Offset to Zero Out Residual Current
  • Fast HV Cutoff and Quick Discharge of Device Under Test
  • RS-232 and I/O Interfaces Included Standard
  • IEEE-488 and Printer Interfaces Optional
  • Built-In Operator Prompted Software Calibration Routine
  • Front and Rear Panel Output Connections
  • 40A Ground Bond Testing with Optional Transformer
  • CaptivATE Automation Software for G6100 Plus; Optional
  • CE, TUV & UL Marked
  • GB: Standard 30A output, Optional 40A output

Options & Accessories:
G39 = IEEE-488 Interface [G1000/G6x00P] - A190508
G43 = Rack Mount Kit [H2000/GkV/G6x00P] - A190343
G45 = 40A Ground Bond Option [G6x00 Plus] - A190334
G48 = 60A Ground Bond Option [G6x00 Plus] - A190337
G32 = Isolation Transformer (1000VA) [G6100P] - A190314
G50 = Isolation Transformer (2000VA) [G6100P]
G25 = Corded Product Adapter (240V) [G6x00P]
G30 = Corded Product Adapter Leakage (115V) [6000-7]
G50-01 = Cable [6000-07]
5000-03 = Scanner, 8 Ch HV, rack mt [G Specialty/G6x00P] - A190301
5000-04 = Scanner, 8 Ch HV/4GC, rack mt [G6x00P] - A190305
6000-01 = Scanner, 8 Ch, 5 HV/3GC [G6000P] - A190302
6000-02 = Scanner, 8 Ch, 3 HV/5GC [G6000P] - A190303
6000-03 = Scanner, 8 Ch, 8 HV [G6000P] - A190304
6000-07 = 20A Leakage Current Scan Unit [G6100P] - A190308

S02 = HV Lead Set, high & low, 1m - W38 001940/W38 001760
S02-02 = HV Lead Set, 12ft
S02-07 = HV Lead Set, 10 ft, unterminated, qty 8
S02-08 = HV Lead Set, 8 meters
S04 = HV Lead Set, high & low, 2m - W38 001950/W38 001920
G13 = Corded Product Adapter (115V)
S05 = Foot Switch
S06 = High Voltage Probe
S08 = Gun Probe
S08-05 = Gun Probe, 4 meters
S09 = HV Lead, 1 meter, unterminated - W38 000676
S10 = HV Lead, 2 meters, unterminated - W38 000680
S11 = Gun Probe with remote start
S12 = Load Box, resistive (200K-500K)
S14 = Load Box, custom resistors
S14-01 = Load Box, Pass/Fail
S14-03 = Load Box, Power Entry Adapter, Pass/Fail
S14-05 = Load Box, Calibration (45k-1G)
G14 = Power Entry Adapt Cable(std w/G6000P) - W38 000870
G15 = GB Lead Set, high & low [6000P/G1050/S50P] - W38 001830
G15-03 = GB Lead Set, 8 Meter [6000P/G1050/S50P]
G15-04 = GB Lead Set, 3 Meter [6000P/G1050/S50P]
G16 = International Power Strip
G33 = Power Entry Adapt Cable [std w/G6000P]
G40 = Scanner Clip Lead Set (8)
630250 = USB to RS-232 Serial Adapter for Guadian series
CaptivATE Kit = "CaptivATE Required Kit for CaptivATE 3.3 and 3.6 Includes: CaptivATE manual, RS-232 Cable, USB RS-232 Cable and Barcode scanner."
CaptivATE 3.6 = CaptivATE 3.60 Automation Software
CaptivATE 3.6M = CaptivATE 3.60 Automation Software Medical
  • 制造商: Quadtech
  • 模型: Guardian 6100 Plus