The Guardian 6000 Plus Electrical Safety Analyzer performs AC and DC hipot (hy-pot),
insulation resistance, ground bond (continuity) measurements for a complete
dielectric testing solution. A fully automated tester, the G6000 Plus performs
both high voltage electrical safety tests including dielectric withstand and
dielectric breakdown and high current ground bond tests in accordance with the
requirements of UL 60950 and other product safety compliance standards.
- A complete electrical safety testing solution in a single instrument
- Simultaneous hipot and ground bond testing
- Fully automated tester for integration into a production environment
- High voltage/high current scanner options for multi-point testing
- Archive test setups, data and results with CaptivATE Automation
Software
Features
- AC Hipot: Programmable Voltage 50 to 5000VAC, Leakage Current to 40mA
- DC Hipot: Programmable Voltage 50 to 6000VDC, Leakage Current to 12mA
- Insulation Resistance: 100kΩ to 50GΩ, Test Voltage 50 to
1000VDC
- Ground Bond: Programmable Current to 30A, R Measurement to 510mΩ
- Twin Port Simultaneous Hipot and Ground Bond Testing
- Open/Short Circuit Detection Mode
- Programmable Hi/Lo Limits for Pass/Fail Testing
- Ability to Perform Multiple Tests in Sequence
- Internal Storage and Recall of 100 Test Setups, 50 Steps Each
- Programmable Ramp, Dwell and Test Times
- Front Panel Lockout Prevents Changes to the Test Setup
- Automatic Offset to Zero Out Residual Current
- Fast Cutoff and Quick Discharge of Device Under Test
- RS-232 and I/O Interfaces Included Standard
- IEEE-488 and Printer Interfaces Optional
- Pause Mode Allows the Operator to Change Device Connection and Continue
- Built-In Operator Prompted Software Calibration Routine
- Front and Rear Panel Output Connections
- 40 Ground Bond Testing with Optional Transformer
- Multi-Point Testing with Optional Internal Scanner and/or External
Scanners
- CaptivATE Automation Software for G6000 Plus; Optional
- CE, TUV Marked
Options & Accessories:
G39 = IEEE-488 Interface [G1000/G6x00P] - A190508
G43 = Rack Mount Kit [H2000/GkV/G6x00P] - A190343
G45 = 40A Ground Bond Option [G6x00 Plus] - A190334
G48 = 60A Ground Bond Option [G6x00 Plus] - A190337
G32 = Isolation Transformer (1000VA) [G6100P] - A190314
G50 = Isolation Transformer (2000VA) [G6100P]
G25 = Corded Product Adapter (240V) [G6x00P]
G30 = Corded Product Adapter Leakage (115V) [6000-7]
G50-01 = Cable [6000-07]
5000-03 = Scanner, 8 Ch HV, rack mt [G Specialty/G6x00P] - A190301
5000-04 = Scanner, 8 Ch HV/4GC, rack mt [G6x00P] - A190305
6000-01 = Scanner, 8 Ch, 5 HV/3GC [G6000P] - A190302
6000-02 = Scanner, 8 Ch, 3 HV/5GC [G6000P] - A190303
6000-03 = Scanner, 8 Ch, 8 HV [G6000P] - A190304
6000-07 = 20A Leakage Current Scan Unit [G6100P] - A190308
S02 = HV Lead Set, high & low, 1m - W38 001940/W38 001760
S02-02 = HV Lead Set, 12ft
S02-07 = HV Lead Set, 10 ft, unterminated, qty 8
S02-08 = HV Lead Set, 8 meters
S04 = HV Lead Set, high & low, 2m - W38 001950/W38 001920
G13 = Corded Product Adapter (115V)
S05 = Foot Switch
S06 = High Voltage Probe
S08 = Gun Probe
S08-05 = Gun Probe, 4 meters
S09 = HV Lead, 1 meter, unterminated - W38 000676
S10 = HV Lead, 2 meters, unterminated - W38 000680
S11 = Gun Probe with remote start
S12 = Load Box, resistive (200K-500K)
S14 = Load Box, custom resistors
S14-01 = Load Box, Pass/Fail
S14-03 = Load Box, Power Entry Adapter, Pass/Fail
S14-05 = Load Box, Calibration (45k-1G)
G14 = Power Entry Adapt Cable(std w/G6000P) - W38 000870
G15 = GB Lead Set, high & low [6000P/G1050/S50P] - W38 001830
G15-03 = GB Lead Set, 8 Meter [6000P/G1050/S50P]
G15-04 = GB Lead Set, 3 Meter [6000P/G1050/S50P]
G16 = International Power Strip
G33 = Power Entry Adapt Cable [std w/G6000P]
G40 = Scanner Clip Lead Set (8)
630250 = USB to RS-232 Serial Adapter for Guadian series
CaptivATE Kit = "CaptivATE Required Kit for CaptivATE 3.3 and 3.6
Includes: CaptivATE manual, RS-232 Cable,
USB RS-232 Cable and Barcode scanner."
CaptivATE 3.6 = CaptivATE 3.60 Automation Software
CaptivATE 3.6M = CaptivATE 3.60 Automation Software Medical
- 制造商: Quadtech
- 模型: Guardian 6000 Plus
|