Data Loggers Recorders Plotters : TEAC LX-110-16AL-ST

此产品是工厂翻新

TEAC LX-110-16AL-ST
放大图片TEAC LX-110-16AL-ST

Call 1-800-615-8378 for more information

Request a Quote

Check Rental Availability

省钱-购买二手设备


LX-100 Series data accquisition and recording system. TEAC has been desined for fast set-up,reliable recording applications in the field and in the laboratory. Building upon the success and convenience of TEAC DAT recorders, the LX-100 Series enables recording of wider bandwidths,has built-in connectivity with sensors, removable solid-state digtal recording media,easy and fast PC connection,and is desigened to provide cost-efficient data recording and front-end solutions.

LX-110/120 Unit Specification

Sampling Frequencies

(LX-110/LX-120)

96 / 48/ 24/ 12 / 6 /3 / 1.5 kHz (Common to each Channel)

Low speed sampling Cutoff Frequency Attenuation
1kHz 400Hz -80dB( at 500Hz )
500Hz 200Hz -80dB( at 250Hz )
200Hz 80Hz -80dB( at 100Hz )
100Hz 40Hz -80dB( at 50Hz )
50Hz 20Hz -80dB( at 25Hz )
20Hz 8Hz -80dB( at 10Hz )
10/5/2/1Hz 4Hz -80dB( at 5Hz )
2/5/10/30/60s(cycle) 4Hz -80dB( at 5Hz )
(Aliasing will occur at and under 5Hz sampling)

Sampling Frequenies

LX-120

102.4 / 51.2 / 25.6 / 12.8 / 5.12 / 2.56 / 1.28 kHz
65.536 / 32.768 / 16.384/ 8.192 /4.096 / 2.048 / 1.024 KHz

100 / 50 / 20/ 10 / 5 / 2 / 1 kHz (Common to each Channel )

Tachometer Pulse Input

LX-120
(Cannot be used simultaneously with generator output)
Num. of Input Channels 2 x 16 bit Channels?2 x 32 bit Channels(Highest sampling frequency settings support the moving average only at one(1))
Use the lowest 1bit for techometer pulse timing bit.
Input Format Threshold level selections +0.5/1/2.5/10/20 V (Max allowable input voltage is 50 V)
Input Connector BNC
Frequency Division Ratio Setting 1 to 255
Moving Average Measurement 1 to 16
Measurement Mode Pulse count mode(Count of number of pulses within the gate time; Conunt of the total number from start to stop),Cycle count mode,Frequncy measurement mode,RPM mode

Generator Output

LX-120
(Cannot be used simultaneously with tachometer pulse input)
Num. of Output Channels 1ch (Monitor output and a combined use)
Output signal Sine wave,Sweep Sine wave,Pulse,Pink noise,White noise
Input Channel change 1/ 2 / 4 / 8 / 16 / 24 / 32 ch

Recording Devices

Choice of Memory only,Memory+PC card drive*
Memory From the standard 64MB to a maximum of 576 MB
PC card

Flash memory , supports up to 8GB capacity (FAT16 or FAT32)

*Please refer to homepage reference or business for the recommended PC Card.
Inteface Choice of 10BASE-T/100BASE-TX or Firewire( IEEE1394) (Specify one when you order)
Front Panel Control Keys REC FWD,REC FWD,STOP,PAUSE,EVENT,P.LOCK
Monitor Channel 1(analog output),BNC
Monitor output level +/-1 to 5 V (0.1 V step)
Microphone Jack 1

Speaker and Earphone Jack

1 each

MAX. Recording Rate

Memory Approx.1.6 MB/s,PC card Approx.0.8 MB/s

PC Throughput

Firewire(IEEE1394) Approx. 1.6 MB/s,Ethernet Approx.0.8 MB/s

Time Precision

+/-1ppm ( 25 deg C )

Temperature and Humidty

5 to 35 deg C Humidity 20 to 85%RH (Operation)(non-condensing)

Internal Clock Correction

+/- 30-seconds adjustment

Power Supply

11 to 30 V DC

Safety Standards

CE,VCCI

Vibration

Conforms to MIL-STD-810 Figure 514.4-1,2,3 for the models with memory only memory + PC card drive
Power Consumption *These specifications are different by the number of the amplifier / channels to choose.Please refer to amplifier specifications page.

Usable OS of Standard software [LX-Navi]

Windows XP/ Windows 2000

External Dimension (WxHxD) (Excluding protruding Parts)

Approx 300 x 65 x 200 mm

Approx 11 13/16" x 2 9/16" x 7 7/8"
Weight *These specifications are different by the number of the amplifier / channels to choose.Please refer to amplifier specifications page.
Standard accessories
DC Power Cable/AC Adaptor/Standard software[LX-Navi] /Instruction Manual

  • 制造商: TEAC
  • 模型: LX-110-16AL-ST